FACTORY GUIDE
	Shown above is a clock that cost us $65. Note how easy it is to overide the factory guide while positioning. Note how difficult it would be to position it exactly at the "0" point for engraving when using the factory guide. Think of the money you would throw away if it was not positioned properly. Now, look at how easy the job is with the LaserAlign. Perfectly positioned in seconds - center found instantly. This job was for 50 pieces - imagine how much total TIME & MONEY you will save with LaserAlign.
	FACTORY GUIDE
	As with the clock in the example above, this acrylic name bar will be much easier to set up and make straight and square with the LaserAlign System. You save Time, Product and Money!
	FACTORY GUIDE
	Nearly every product you engrave will be Easier, Quicker and More Accurate with the LaserAlign System.
	HOME LaserAlign 2 Intro LaserAlign 1 Intro SAMPLES LaserAlign 2 SAMPLES LaserAlign 1 ORDER CONTACT INSTRUCTIONS Set-UP INSTRUCTIONS LaserAlign 1 INSTRUCTIONS LaserAlign 2
	Design of the LaserAlign System and all contents of this website are Copyrighted 2002 - 2004 by FireCarvers/Ken Hubert.